The best way to remove anchors from wall is to use a combination of tools that can get the job done in a few minutes. You can use a flat head screwdriver and a wide nail to help you unscrew the anchor. However, you will need to make sure you have the right drill bit size to avoid ripping the anchor out of the wall. If you have a thicker metal anchor, you may need to break it out with a hammer.
In order to get the right combination of tools, you will need a sharp screwdriver and a utility knife. These tools can cut through the top layer of drywall, which can give you access to the lip on the anchor. This can then be lifted by a putty knife.
Another tool you will need is a sharp drill. Be careful not to go too deep. Otherwise, you risk tearing chalky drywall or drilling through the drywall. To prevent the hole from getting bigger, you can patch it up with a coat of joint compound.
A utility knife can also be used to cut out the drywall on the anchor’s head. This is a good thing to do if you are trying to remove an expansion anchor. That is because this will make the head easier to remove.
Once you have the anchor removed, you may want to apply a coat of spackle to cover up the hole. It can be difficult to do this if you do not have a spackle applicator. An alternative is to use a wide nail and a pry bar.
Before you start your next project, you should check the condition of your wall and anchors. Anchors may need to be replaced with a toggle bolt or molly bolt. They may also be rusted and damaged, which will require more work. Make sure the wall is free of any pipes or electrical wires that may be encroaching on the anchor.
When you are finished, you may want to test the new anchor by hanging an object from it. If the anchor holds up, then it is a safe bet that you will be able to pull it out. On the other hand, if the anchor doesn’t pull out, you will need to do more.
There are many other ways to remove anchors from wall. Some involve a power tool, such as a hammer and a screwdriver. However, they can be difficult to execute on a brittle wall, so you might want to try a more straightforward method.
One other method is to punch a hole in the wall and use a flat-head screwdriver to push the anchor out of the wall. If you choose this method, be sure to wear safety goggles, as you can hurt yourself if you accidentally fall into the hole.
Getting rid of a stuck anchor is not as easy as it sounds. Sometimes the anchor is simply stuck behind the drywall and can’t be easily removed. Other times, the anchor is too large or not the correct size for your application.
Also Read: How to Put in Drywall Anchors