Stripped screws can be a pain. They are very hard to remove and may even damage the wood around them. But fortunately there are many ways to get rid of a screw with no head. For instance, you can use a weld nut. This allows you to remove a screw with no head without too much damage to the bolt itself. However, this method requires you to purchase a weld nut in the correct size for the job at hand.
Another option is to fill the hole in the screw. If you are lucky, you can find an epoxy wood filler to do the job. You can also use a putty knife to get the job done. Once you’ve filled the hole, you can cover it up with some scrap wood. A patch of wood is also a good idea if you can’t afford to replace the screw.
The rotary tool trick is another way to get a screw out of your hands. First, make a slit in the shaft of the screw with a small cutting disk. Next, you can insert a flat-head screwdriver into the new indentation. Twist it into position and turn it slightly. It should be able to spin in a circle.
For a more elaborate solution, you can use a special screw extractor. These tools are designed for specific purposes, such as removing a screw with no head. Make sure you wear protective goggles while you are working. There is a risk of splintering the screw or injuring yourself.
Removing a stripped screw with no head is not always as easy as it seems. Oftentimes, the screw will need to be drilled out. This allows you to more easily remove the screw with a screwdriver. Alternatively, you could use a special drill bit to make a trough in the middle of the screw. One problem with drilling the middle of a screw is that the hole will remain visible. To avoid this, you can either cover it with some wood or use a hammer to drive the screw out.
The old fashioned method of reversing the slant atop the threads of the screw to a reverse threaded hole is still a popular way to do it. Depending on the size of the threaded screw, you may have to try several times before you can actually get it out.
While there is no perfect solution for removing a stripped screw, it’s possible to do it safely and efficiently. Using an elastic rubber band is one option. You can twist it into place to provide the extra traction needed to get the job done. Although it won’t completely remove the screw, it will give you enough grip to do the job. Alternatively, you can drill a trough into the middle of the screw and then use a specialized extractor.
However, there is a better way. Fortunately, the best solution for removing a screw with no head involves a few simple tools and steps. Of course, you’ll need the right sized drill bit and the proper screwdriver. Also, you’ll need the appropriate lubricant.
Also Read: How to Remove a Striped Screw