Painting over stained wood is a great way to add a new look to your furniture. But before you begin painting, it’s important to make sure the surface is prepared properly. Choosing the right type of paint and following a few simple steps will help ensure that you get a smooth finish.
If you’re painting over an oil-based stain, you’ll need to use special prep steps to avoid bleeding through the paint. For example, you’ll need to sand the surface and remove all excess varnish before applying a second coat. It’s also a good idea to apply a primer. This will allow you to apply fewer coats of paint, which can save you time and money. You’ll also need to give the wood a few days to dry before applying a second coat.
If your wooden surface is still in good condition, you can skip the sanding. However, if the surface is greasy or glossy, it can interfere with the adhesion of the paint. Fortunately, you can buy deglosser. This is a liquid that can be applied to your wood surface before painting to help prepare the surface. Then, it’s a simple process to apply your favorite paint.
When it comes to picking the right paint to cover your stained wood, you’ll want to consider the type of wood you have. Water-based paint will stick to stained wood, but oil-based products may show through. You should also check for the sheen of the paint. Paints that have a matte finish are often more resistant to fading and peeling. They are also easier to maintain than glossy paints. Also, you might choose a finish that protects your wood from the elements.
To paint over stained wood, you’ll need to sand and prime the surface. This is necessary because your paint needs something to adhere to in order to last for a long period of time. Sanding the surface removes the glossy finish and helps the paint adhere better. There are several types of sandpaper you can use. Choose a grit that’s appropriate for the type of wood you’re working with. Try at least 100 or 150 grit. Ideally, you’ll want to sand and prime at the same time, because the sanding helps the primer adhere to the wood.
Once the primer and sanding are complete, you’ll need to apply your favorite wood paint. Depending on the stain and color, you may need more than one coat. Depending on the size of the area you’re working with, you’ll need to wait between two and four hours for the paint to dry. After drying, you can apply another coat to make the paint look its best.
Painting over a stained wood surface can be done with some DIY tools and techniques. However, there are more steps involved than you might imagine. You’ll need to sand the surface, apply a deglosser, and spackle the surface before applying your paint. Plus, you’ll need to make sure the wood is ventilated properly before applying the paint.