When repairing a stripped metal screw hole, you need to find a way to reclaim the lost threads and get them back in. Using the right tools and techniques can make your job a lot easier. Here are some tips and tricks you can try.
The best way to go about it is to use a combination drill and tap set. This allows you to drill and tap a screw hole in one step. You may also want to enlarge the hole to accommodate a bigger screw. If your task is fairly small, you can even use a torqued-down electric drill to drive the new screw into the enlarged hole.
Alternatively, you can fix a stripped metal screw hole by using a bigger screw. This is the easiest of the methods. However, this is not a foolproof method and you should be careful not to overtighten the screw or you could split the wood. In addition, you should be sure that the screw you use is the right size for the job.
Another alternative to fixing a stripped metal screw hole is to fill it with a bit of epoxy. This will give you a more solid grip and keep your screw from slipping. After applying the epoxy, you should let it dry for an hour or so.
Another method to fill a stripped hole is to cut some metal strips and insert them into the hole. A metal jigsaw can help you do this. It is important to use the right size and type of wood because some types of lumber have a stronger grip than others. Also, you should make sure to use the same kind of wood that you used to build the original piece.
One other method to reclaim the lost threads is to install a thread cutting tap. This is similar to the thread enlarging method, but the threads are cut instead of enlarged. The trick is to have your new threads come out of the hole as close to the surface of the metal as possible. Lastly, you can add an extra line of threads to the hole if you really want to.
There are many ways to go about it, but if you are only interested in the basics, the most important thing to do is to figure out which method will work for you. Depending on your budget, you may opt to buy a tap and die set or use one of the more expensive alternatives. Of course, a larger screw is the most obvious choice, but you may need to get creative if you have limited access to the area where you want to mount the screws.
Although there are many methods to fix a stripped metal screw hole, the simplest option is to simply enlarge the existing hole. Several types of screws can be used to accomplish this, such as self-tapping metal screws. These are designed to provide a sturdy grip on the surface of the metal, and they are particularly effective on doors.
Also Read: How to Fix a Stripped Screw Hole in Metal